Liquid ammonia pump cooling method introduced

Liquid ammonia pump cooling air cooling, water cooling, the rotor internal cooling, the rotor film cooling, these cooling methods are effectively solve the long-term working liquid ammonia pump heat generated an effective method. Introduction of liquid ammonia pump cooling 1, the rotor film cooling This cooling method is connected to the liquid ammonia pump at the entrance of a pipeline, with even cooling oil drip away the heat of the rotor. 2, the air-cooled so-called wet liquid ammonia pump, that is, by the intercooled or two-stage pump inhaled air compressed, through a combination of absorption and phase difference combination silencer transmission. 3, water cooling liquid ammonia pump due to the delivery and compression of gas and heat, these heat must be transmitted from the rotor to the shell and emit. 4, the rotor's internal cooling In order to make the liquid ammonia pump work under higher pressure, can take a more effective cooling method, the rotor is about to use circulating oil cooling, respectively, at both ends of the pump shaft with oil holes, oil diameter shaft into the head, Through the rotor wall and then discharged from the other end. Extended reading: Top ten brands of motorcycles Canton Fair Central China Construction Water Exhibition Pump manufacturers ranked ptc exhibition industry Internet (Xiamen) Technology Co., Ltd. Asia Pump Network Editor: He Duanhui (QQ / WeChat:) http: //beng.liuti. cn / (Service Hotline:)

Carbon Steel Pipe

Carbon Steel Pipe,Carbon Pipe,Low Carbon Steel Pipe,Carbon Steel Welded Pipe

Liaocheng Xinglong Seamless Tube Manufacturing Co., Ltd. , https://www.lcxlpipe.com